Golden Valley Hobbies - Converters NEM Pockets for Hornby Seacow
This item is in Stock and available for dispatch
RRP £4.00
Our Price
£3.60
Our Price
£3.60
These converters are designed to replace the coupling on the Hornby Seacow wagon.
For this wagon modification, you will need a sharp craft knife/cutters, needle files, superglue and a screwdriver.
Begin by cutting the arm at the crease on the underside, as the arm angles downwards. Take care to make a clean cut.
Next, tidy up the end of the arm and ensure it fits snugly on the channel of the NEM converter.
The fit should be reasonably tight.
Once you are satisfied with the fit, remove the arm and apply a very small amount of superglue to the pocket.
Make sure the arm is level and firmly pushed into the channel of the pocket.
Allow the glue to dry completely.
Afterward, file just behind the pocket where the arm has been attached, as shown in the photo.
This step ensures a smooth surface and proper fit for a coupling tension lock or Kadee coupler (the short Kadee 17These converters are designed to replace the coupling on the Hornby Seacow wagon.
For this wagon modification, you will need a sharp craft knife/cutters, needle files, superglue and a screwdriver.
Begin by cutting the arm at the crease on the underside, as the arm angles downwards. Take care to make a clean cut.
Next, tidy up the end of the arm and ensure it fits snugly on the channel of the NEM converter.
The fit should be reasonably tight.
Once you are satisfied with the fit, remove the arm and apply a very small amount of superglue to the pocket.
Make sure the arm is level and firmly pushed into the channel of the pocket.
Allow the glue to dry completely.
Afterward, file just behind the pocket where the arm has been attached, as shown in the photo.
This step ensures a smooth surface and proper fit for a coupling tension lock or Kadee coupler (27973-the short Kadee 17 is the best fit$).
For this wagon modification, you will need a sharp craft knife/cutters, needle files, superglue and a screwdriver.
Begin by cutting the arm at the crease on the underside, as the arm angles downwards. Take care to make a clean cut.
Next, tidy up the end of the arm and ensure it fits snugly on the channel of the NEM converter.
The fit should be reasonably tight.
Once you are satisfied with the fit, remove the arm and apply a very small amount of superglue to the pocket.
Make sure the arm is level and firmly pushed into the channel of the pocket.
Allow the glue to dry completely.
Afterward, file just behind the pocket where the arm has been attached, as shown in the photo.
This step ensures a smooth surface and proper fit for a coupling tension lock or Kadee coupler (the short Kadee 17These converters are designed to replace the coupling on the Hornby Seacow wagon.
For this wagon modification, you will need a sharp craft knife/cutters, needle files, superglue and a screwdriver.
Begin by cutting the arm at the crease on the underside, as the arm angles downwards. Take care to make a clean cut.
Next, tidy up the end of the arm and ensure it fits snugly on the channel of the NEM converter.
The fit should be reasonably tight.
Once you are satisfied with the fit, remove the arm and apply a very small amount of superglue to the pocket.
Make sure the arm is level and firmly pushed into the channel of the pocket.
Allow the glue to dry completely.
Afterward, file just behind the pocket where the arm has been attached, as shown in the photo.
This step ensures a smooth surface and proper fit for a coupling tension lock or Kadee coupler (27973-the short Kadee 17 is the best fit$).
Quantity In Pack - 4
Manufacturer : Golden Valley Hobbies
SKU : GVNEM06
EAN :
SKU : GVNEM06
EAN :
